This 6-inch digital caliper is a solid and reliable caliper at a very reasonable price. Take a look at the details of the Wixey 6-inch digital caliper, read the reviews on the Amazon page provided or compare the prices against other 6-inch digital calipers.

Take a look to the right to take the opportunity to buy a Wixey WR100 6-Inch Digital Caliper

 Wixey WR100 6-Inch Digital Calipers with Fractions for sale

Wixey WR100 Digital Caliper Review

The Wixey WR100 6-inch Digital Caliper with Fractions is a calliper that has been solidly made with large numbers that are nice and easy to read. The caliper is made from hardened stainless steel components and the precision ground measuring faces allow you to take inside, outside, depth and step measurements.

It can sometimes be difficult to work out who sells the best digital calipers online but by comparing the prices of a few of the calipers listed below you should be confident that you will find a reliable tool that will give you precise readings that you can rely on.

Get more details

Technical Data

Range: 0-6in 0-150mm
Accuracy: .025mm, .001-inch
Resolution: 0.05mm, 0.001-inch, 1/64 inch
Battery: 6 months life; type CR2032

Mitutoyo have solved this problem with the Mitutoyo Series 500 Solar Powered Digital Caliper. This series of calipers require no battery and it also retains its origin point after the caliper has been turned off.

Mitutoyo Series 500 Solar Powered Digital Calipers for sale

	Mitutoyo 500-464 Digimatic Solar Caliper With Output Caliper Features Absolute calliper means that it retains its origin point even after the display has turned off for the life of the calliper Solar powered – no battery required Hard-coated solar panel for increased durability Comes with SPC output cable with data switch Technical Data Range: 0-6”/150mm Accuracy: +/- .001” Resolution: 0.01mm or .0005” Repeatability: 0.01,, or .0005” More details >>
	Mitutoyo 500-473 Digimatic Solar Caliper Non-Output Caliper Features Absolute calliper means that it retains its origin point even after the display has turned off for the life of the calliper Solar powered – no battery required Hard-coated solar panel for increased durability Origin-set, Data hold, Data output, inch/mm conversion Technical Data Range: 0-4”/100mm Accuracy: +/- .001” Resolution: 0.01mm or .0005” Repeatability: 0.01,, or .0005” More details >>
	Mitutoyo 500-474 Digimatic Solar Caliper Non-Output Caliper Features Absolute calliper means that it retains its origin point even after the display has turned off for the life of the calliper Solar powered – no battery required Hard-coated solar panel for increased durability Technical Data Range: 0-6”/150mm Accuracy: +/- .001” Resolution: 0.01mm or .0005” Repeatability: 0.01,, or .0005” More details >>
	Mitutouo 500-475 Digimatic Solar Caliper Non-Output Caliper Features Absolute calliper – will retain its origin whenever the calliper is restarted Made from stainless steel Solar powered – no battery required Operates in light as low as 60 Lux Origin-set, Data hold, Data output, inch/mm conversion Technical Data Range: 0-8”/200mm Accuracy: +/- .001” Resolution: 0.01mm or .0005” Repeatability: 0.01,, or .0005” More details >>
	Mitutoyo 500-784 Super Caliper – Solar Powered Caliper Features No origin restoration necessary so measurements can be started at any time Eco-friendly Solar powered – no battery required IP67 protection assures waterproof reliability Increased impact resistance of the display unit Technical Data Range: 0-6”/150mm Accuracy: +/- .001” Resolution: 0.01mm or .0005” Repeatability: 0.01mm or .0005” More details >>
	Mitutoyo 500-785 Solar Digimatic Caliper Non-Output Caliper Features No origin restoration necessary, no restriction on operating speed Impact resistance of display unit has been increased for greater durability IP67 protection assures waterproof reliability Eco-friendly materials and components Technical Data Range: 0-8”/200mm Accuracy: +/- .001” Resolution: 0.01mm or .0005” Repeatability: 0.01mm or .0005” More details >>
	Mitutoyo 500-786 Solar Digimatic Caliper with Output Caliper Features No origin restoration necessary, no restriction on operating speed Impact resistance of display unit has been increased for greater durability IP67 protection assures waterproof reliability Eco-friendly materials and components Comes with SPC output cable with data switch Technical Data Range: 0-6”/150mm Accuracy: +/- .001” Resolution: 0.01mm or .0005” Repeatability: 0.01mm or .0005” More details >>

Charge Notes for the 500-784, 500-785 and 500-786

The charge function of these solar calipers allow it to be used in normal conditions without interruption even when the ambient light is insufficient for a short period of time. When the calliper is fully charged it can operate for around one hour in an environment of 50 Lux illumination.

The time needed to charge the caliper can vary depending on the conditions. However, when the Super Caliper is left unused in light of 500 lux (normal working environments) it will take around one hour to reach full charge.

FEATURES:

Some of the features of the calliper include:
Thin blade type jaws that are able to fit into very small grooves making previously difficult outside measurements far easier to obtain.
The outside dimension measuring faces are carbide-tipped.
The calliper is fitted with a depth bar.
There are optional SPC data output cables available for this model if you choose to use them.
It comes supplied in a fitted plastic case.

This calliper has been tested for dust/water protection conforming to IP67 level. It can be used in workshop conditions exposed to coolant, water, dust or oil.

IP67 refers to the protection level at which the calliper has been tested. Level 6 means that it is guaranteed dust-tight and no ingress of dust. Level 7 means it is protected against the effects of temporary immersion in water, ingress of water in quantities causing harmful effects shall not be possible when the enclosure is temporarily immersed 1 meter in water under standardized conditions of pressure and time.

See more details.

Technical Data

Range: 0-6in 0-150mm
Accuracy: .001in
Resolution: 0.01mm or .0005"/0.01mm
Graduation: 0.05mm
Display: LCD
Length standard: ABSOLUTE electrostatic capacitance type linear encoder
Max. response speed: Unlimited
Battery: SR44 (1 pc.), 938882
Battery life: Approx. 3.5 years under normal use
Is available in either digital or analog models
Function of Digital Model
Origin-set, Zero-setting, Power On/Off, Data output, inch/mm conversion (inch/mm models)
Alarm: Low voltage, Counting value composition error

Optional Accessories for Digital Model

05CZA624: SPC cable with data switch (1m / 40”)
05CZA625: SPC cable with data switch (2m / 80”)

Buy a Mitutoyo 573-734 IP67 6" Coolant Proof Digital Caliper

The material for the frame is very durable and at only 3.2 ounces it is not going to weigh you down. Mitutoyo callipers are always made to the highest quality standards so you can be confident in the product you are buying and at less than $45.00 this is a bargain priced product. The caliper comes with a long life battery lasting for two years under normal conditions.

As well as being suitable for the home handyman or DIYer the Mitutoyo plastic caliper is also suitable for use in the lab, wood-shop or office.

Buy A Mitutoyo 700-126 Plastic Digital Caliper

Technical Data
Accuracy: .008in 0.2mm (excluding quantizing error for digital models)
Resolution: 0.1mm or .001"/0.1mm
Range : 0-6in 0-150mm
Display: LCD
Length standard: Electrostatic capacitance type linear encoder
Max. response speed: 1800mm/s
Battery: SR44 (1 pc.), 938882
Battery life: Approx. 2 years under normal use
Function
Zero-setting, Power on/off
Alarm: Low voltage, Counting value composition error
Measurements displayed in both inch and metric
More details here

Consumer Reviews

Overall, this a nice digital caliper for the money. I did some research on digital calipers before buying, as there are a lot of cheap digital calipers available. However, reviewing the many inexpensive ones seemed to consistently show that many had problems with zeroing out reliably, and also the cheap models will continue to drain the battery even when they supposedly power themselves off. I read an article showing that the cheap calipers were still actually measuring while "off", but that the screen was just shut down. The Mitutoyo, while slightly more expensive, reportedly has a exceptionally longer battery life. While you do have to remember to turn the unit off manually, I have accidentally left it on overnight with no problems. I have had no problems with zeroing--the unit is quite repeatable.

Features of the Ultra-Cal Mark III

• Inside, outside, depth and step measuring.
• Three measuring ranges 0-6"/150mm, 0-8"/200mm and 0-12 "/300mm.
• Full scale accuracy: 0.001” / 0.02 mm.
• Conversion from inch to metric
• Hold feature to freeze the display for later viewing
• LCD screen with 0.25” / 6mm digit display.
• High efficiency lithium battery that lasts around 2 years.

This is a high efficiency caliper that has the interfaces available to be connected to a computer for readout download. The connection kit to do this comes separate from the actual caliper. This kit comes with a connection cable, software support disk and an instruction manual.

This particular model of electronic caliper has not been manufactured with IP protection so the moisture protection system is not in place, the Fowler/Sylvac Ultra-Cal Mark IV Electronic Caliper has been released with an IP-65 rating and is more able to cope with coolant sprays and other moisture hazards.

The 799 Series from Starrett is the company’s lower cost alternative in the electronic digital caliper market as there is no option to send data output via a wireless connection (as the 797 Series do).

Features include:

An LCD screen that is .32” high

Inch / millimeter conversion button

A reset to zero function that can be set at any position

The last measuring position is retained after the caliper has been shut off

Auto shut-off after 5 minutes of non-use

Hardened stainless steel body

Fine adjustment thumb wheel

Lock to hold the jaws in position

Resolution is .0005” (0.01mm)

Ranges available:

0-6” (150mm)
0-8” (200mm)
0-12” (300mm)

The extended range set of 799 series calipers have a few different features to the standard sized models:

Minimum and maximum limits set

LCD characters are .50” high

The auto shut-off activates after 30 minutes of non-use

The ranges of the extended range models are:

0-24” (600mm)
0-40” (1000mm)

It should also be noted that the Starrett 799 Series Digital Caliper has not been designed with IP protection which means that there is no specialized water or dust protection applied to the electronics of the device. If this is a concern you should take a look at the Starrett 797 Series Electronic Caliper.

The Mitutoyo Absolute Digimatic Caliper Series 500 features a range of calipers that is simply incredible. The series 500 calipers feature a large LCD screen for easy readout capability. The Zero/ABS key enables you to set the absolute zero position of the caliper when the jaws are set to any position. This is usually going to be when they are closed but it can also be set at any other point.

Other features of the caliper include a thumb roller on most models, an optional Data Hold Unit, a fitted plastic case except for the largest model which comes in a wooden case. The Mitutoyo Absolute Digimatic Caliper Series 500 models are available either in inch/metric format or in metric only. If you need a caliper that offers inches make sure that you have chosen a model that states this.

Models of the Mitutoyo Series 500 are available in sizes that range from 0-4in 0-100mm, 0-6in 0-150mm, 0-8in 0-200mm, 0-12in 0-300mm, 0-18in 0-450mm, 0-24in 0-600mm and finally the massive 0-40in 0-1000mm.

The number of digital calipers available in the series 500 range is truly impressive and a good proportion of the models come with carbide tipped jaws for added strength and accuracy.

The battery required for the series 500 caliper is an SR44, 938882 and according to the company’s specifications sheet this battery would have an expected life in this type of caliper of around 3.5 years under normal use.

A Mitutoyo digital caliper is a tool that will give you reliable service over a long period of time. This is a tool that has been precision made with a lot of thought gone into the features that any craftsman might want in a tool.

Product Specifications

Dimensions: 9.5 x 3.8 x 1 inch; 11.2 ounces
Materials: stainless steel
Range: 0-155mm

More details here

The Neiko digital caliper has taken the LCD display read-out and has enlarged it to make it even easier to read. This is definitely an advantage for those who have slight vision problems or who are working in areas where it is difficult to see a smaller display.

Whereas some other digital calipers are only available in one unit or the other, the Neiko Pro-Quality gives readings in either metric or inches, depending on your preference. It simply takes the push of a button to change from one mode to the other.

Another nice feature is that there is a spare battery supplied with the product. Some people have experienced the annoying let down of finding their digital caliper does not work when taken out of the box because the battery was dead. Should this occur with the Neiko Pro-Quality you will have a backup battery right there in your hand.

There have been reports that there has been some noticeable movement in the rails of the caliper which could throw the precision of the instrument out. This should be taken into consideration when trying to decide whether to buy it or not. However it's a good quality caliper that represents great value for money, particularly when you can get it at a greatly reduced price that brings it down to below $20.00.

Consumer Reviews

This product was well built and worked as advertised. I have no way to check its accuracy, however. For my applications I am not concerned with super accuracy. The inch and mm selection is useful for me. The unit came with a dead battery in the caliper but there was a spare battery in the case.

This looked well-made at first glance only. The main rail had about 5mm of total curvature, the inner rail had about 1mm of play, and the end-stop was crooked. The motion is also rough and drifts unless you lock it down. I would only trust it to a few hundredths, getting worse as you approach the terminal length, because of the bowed rail.

If this is typical assembly quality, the carrying case is (relatively) the best thing about this product. They should downgrade the rated accuracy for slack in the rails. It's probably based on the read-head's potential on a much better frame.

View more consumer reviews

Dimensions: 12 x 9 x 7 inches; 12.9 ounces
Material: stainless steel
Range: 0-150mm
(more details)

The Titan 23175 Electronic Digital Caliper is a digital caliper made with stainless steel components containing inside and outside measurement capabilities as well as a depth measuring range up to 6”. This is a metric scale caliper so you will be working in metric measurements rather than inches. The on/off switch of this caliper is located in a position in which it can be unintentionally pressed so it is possible that it can be sitting unused in its case and still be on.

This caliper gives you an easy to read LCD screen as well an adjust wheel and a lock knob. As well as being able to reset the display back to zero, it is possible to reset the caliper in order to give you a differential measurement.

The price you can expect to find this digital caliper for is around the $20.00 mark although many stores will price it more cheaply.

As with many products in which the electronic part is powered by a battery, make sure that you also buy yourself a spare battery. In many cases the product will have been sitting on the shelves for quite a long time and the chances are that the battery will have been worn down before you have bought it.