Mitutoyo Series 500 Solar Powered Digital Calipers

May 27, 2010 · Posted in Mitutoyo Absolute Digimatic Caliper Series 500 · Comments Off 

One of the minor drawbacks with using an electronic digital caliper was the fact that it was battery powered and there was a need to ensure that you had a spare battery on hand should the one in your caliper go flat. It’s a problem that will only occur on the rare occasion but you can be sure that the time it does will be the time that you simply must have the most precise measurements possible.

Mitutoyo have solved this problem with the Mitutoyo Series 500 Solar Powered Digital Caliper. This series of calipers require no battery and it also retains its origin point after the caliper has been turned off.

Mitutoyo Series 500 Solar Powered Digital Calipers for sale

  Mitutoyo 500-464 Digimatic Solar Caliper With Output
Caliper Features
Absolute calliper means that it retains its origin point even after the display has turned off for the life of the calliper
Solar powered – no battery required
Hard-coated solar panel for increased durability
Comes with SPC output cable with data switch
Technical Data
Range: 0-6”/150mm
Accuracy: +/- .001”
Resolution: 0.01mm or .0005”
Repeatability: 0.01,, or .0005”
More details >>
 
  Mitutoyo 500-473 Digimatic Solar Caliper Non-Output
Caliper Features
Absolute calliper means that it retains its origin point even after the display has turned off for the life of the calliper
Solar powered – no battery required
Hard-coated solar panel for increased durability
Origin-set, Data hold, Data output, inch/mm conversion
Technical Data
Range: 0-4”/100mm
Accuracy: +/- .001”
Resolution: 0.01mm or .0005”
Repeatability: 0.01,, or .0005”
More details >>
 
  Mitutoyo 500-474 Digimatic Solar Caliper Non-Output
Caliper Features
Absolute calliper means that it retains its origin point even after the display has turned off for the life of the calliper
Solar powered – no battery required
Hard-coated solar panel for increased durability
Technical Data
Range: 0-6”/150mm
Accuracy: +/- .001”
Resolution: 0.01mm or .0005”
Repeatability: 0.01,, or .0005”
More details >>
 
  Mitutouo 500-475 Digimatic Solar Caliper Non-Output
Caliper Features
Absolute calliper – will retain its origin whenever the calliper is restarted
Made from stainless steel
Solar powered – no battery required
Operates in light as low as 60 Lux
Origin-set, Data hold, Data output, inch/mm conversion
Technical Data
Range: 0-8”/200mm
Accuracy: +/- .001”
Resolution: 0.01mm or .0005”
Repeatability: 0.01,, or .0005”
More details >>
 
  Mitutoyo 500-784 Super Caliper – Solar Powered
Caliper Features
No origin restoration necessary so measurements can be started at any time
Eco-friendly
Solar powered – no battery required
IP67 protection assures waterproof reliability
Increased impact resistance of the display unit
Technical Data
Range: 0-6”/150mm
Accuracy: +/- .001”
Resolution: 0.01mm or .0005”
Repeatability: 0.01mm or .0005”
More details >>
  Mitutoyo 500-785 Solar Digimatic Caliper Non-Output
Caliper Features
No origin restoration necessary, no restriction on operating speed
Impact resistance of display unit has been increased for greater durability
IP67 protection assures waterproof reliability
Eco-friendly materials and components
Technical Data
Range: 0-8”/200mm
Accuracy: +/- .001”
Resolution: 0.01mm or .0005”
Repeatability: 0.01mm or .0005”
More details >>
 
  Mitutoyo 500-786 Solar Digimatic Caliper with Output
Caliper Features
No origin restoration necessary, no restriction on operating speed
Impact resistance of display unit has been increased for greater durability
IP67 protection assures waterproof reliability
Eco-friendly materials and components
Comes with SPC output cable with data switch
Technical Data
Range: 0-6”/150mm
Accuracy: +/- .001”
Resolution: 0.01mm or .0005”
Repeatability: 0.01mm or .0005”
More details >>
 

Charge Notes for the 500-784, 500-785 and 500-786

The charge function of these solar calipers allow it to be used in normal conditions without interruption even when the ambient light is insufficient for a short period of time. When the calliper is fully charged it can operate for around one hour in an environment of 50 Lux illumination.

The time needed to charge the caliper can vary depending on the conditions. However, when the Super Caliper is left unused in light of 500 lux (normal working environments) it will take around one hour to reach full charge.

Mitutoyo 573-734 IP67 6″ Coolant Proof Digital Caliper

May 22, 2010 · Posted in Mitutoyo 573-734 IP67 6" Coolant Proof Digital Caliper · Comments Off 
Mitutoyo 573-734 Ip67 6 Mitutoyo 573-734 Ip67 6"o/P Blade Type Coolant Proof Dig Caliper
Sale Price: $514.00

Mitutoyo calipers represent the finest in quality electronic calipers and this model, the Series 573-734 Coolant Proof caliper, brings an added feature to the range with the IP67 water and coolant proofing. This ensures that the calliper will be able to withstand immersion in water and the accidental splashes and exposure to various workshop interferences.


FEATURES:

Some of the features of the calliper include:
Thin blade type jaws that are able to fit into very small grooves making previously difficult outside measurements far easier to obtain.
The outside dimension measuring faces are carbide-tipped.
The calliper is fitted with a depth bar.
There are optional SPC data output cables available for this model if you choose to use them.
It comes supplied in a fitted plastic case.

This calliper has been tested for dust/water protection conforming to IP67 level. It can be used in workshop conditions exposed to coolant, water, dust or oil.

IP67 refers to the protection level at which the calliper has been tested. Level 6 means that it is guaranteed dust-tight and no ingress of dust. Level 7 means it is protected against the effects of temporary immersion in water, ingress of water in quantities causing harmful effects shall not be possible when the enclosure is temporarily immersed 1 meter in water under standardized conditions of pressure and time.

See more details.

Technical Data

Range: 0-6in 0-150mm
Accuracy: .001in
Resolution: 0.01mm or .0005"/0.01mm
Graduation: 0.05mm
Display: LCD
Length standard: ABSOLUTE electrostatic capacitance type linear encoder
Max. response speed: Unlimited
Battery: SR44 (1 pc.), 938882
Battery life: Approx. 3.5 years under normal use
Is available in either digital or analog models
Function of Digital Model
Origin-set, Zero-setting, Power On/Off, Data output, inch/mm conversion (inch/mm models)
Alarm: Low voltage, Counting value composition error

Optional Accessories for Digital Model

05CZA624: SPC cable with data switch (1m / 40”)
05CZA625: SPC cable with data switch (2m / 80”)

Buy a Mitutoyo 573-734 IP67 6" Coolant Proof Digital Caliper

Mitutoyo 700-126 Plastic Digital Caliper

May 20, 2010 · Posted in Mitutoyo 700-126 Plastic Digital Caliper · Comments Off 

Mitutoyo 700-126 Plastic Digital CaliperThe Mitutoyo 700-126 Plastic Digital Caliper is a possible choice that you would make when buying a new calliper for use at home if you were after a lightweight calliper. The plastic material with which the jaws are constructed of would mean that you don’t run the risk of scratching whatever items you are measuring should they be delicate.

The material for the frame is very durable and at only 3.2 ounces it is not going to weigh you down. Mitutoyo callipers are always made to the highest quality standards so you can be confident in the product you are buying and at less than $45.00 this is a bargain priced product. The caliper comes with a long life battery lasting for two years under normal conditions.

As well as being suitable for the home handyman or DIYer the Mitutoyo plastic caliper is also suitable for use in the lab, wood-shop or office.

Buy A Mitutoyo 700-126 Plastic Digital Caliper

Mitutoyo 700-126, Plastic Digital Caliper, 0 - 6 Mitutoyo 700-126, Plastic Digital Caliper, 0 - 6"/150mm, .001"/0.1mm, Non-Output
List Price: $45.35
Sale Price: $41.58
Average Rating:

Technical Data
Accuracy: .008in 0.2mm (excluding quantizing error for digital models)
Resolution: 0.1mm or .001"/0.1mm
Range : 0-6in 0-150mm
Display: LCD
Length standard: Electrostatic capacitance type linear encoder
Max. response speed: 1800mm/s
Battery: SR44 (1 pc.), 938882
Battery life: Approx. 2 years under normal use
Function
Zero-setting, Power on/off
Alarm: Low voltage, Counting value composition error
Measurements displayed in both inch and metric
More details here

Consumer Reviews

Overall, this a nice digital caliper for the money. I did some research on digital calipers before buying, as there are a lot of cheap digital calipers available. However, reviewing the many inexpensive ones seemed to consistently show that many had problems with zeroing out reliably, and also the cheap models will continue to drain the battery even when they supposedly power themselves off. I read an article showing that the cheap calipers were still actually measuring while "off", but that the screen was just shut down. The Mitutoyo, while slightly more expensive, reportedly has a exceptionally longer battery life. While you do have to remember to turn the unit off manually, I have accidentally left it on overnight with no problems. I have had no problems with zeroing--the unit is quite repeatable.